Netwave Switches (NW6000-7001 & NW6000-7501)

When ancillary products such as cable, connectors and switches do not meet
maritime environmental requirements, the ability of a major product to meet
various performance and environmental standards is compromised.
Introducing the Netwave NW6000-7001 standard 10 port switch and the
NW6000-‑7501 managed PoE+ switch with 4 Gb slots + 8 PoE+ slots. Two types
of Ethernet switch, each EMC certified and designed to withstand environmental
and physical influences. The NW6000-7001 standard switch and the NW6000-
7501 PoE+ switch are IEC-60945 compliant and meet maritime environmental
requirements.

Features

NW6000-7001 (standard switch)
Managed switch allowing for management and monitoring of traffic on LAN
8 x 10/100 Base-TX + 2 x 100FX/Gigabit SFP ports
Ruggedised housing with mounting bracket, IEC 60945 approved
Certified by leading notified body for maritime use

NW6000-7501 (PoE switch)
Managed PoE+ switch allowing for management and monitoring of traffic on LAN
8 x 10/100 Base-TX + 4 x GBe SFP (fibre) ports
PoE ports comply with IEE 802.3at standards for 30W
Ruggedised housing with mounting bracket, IEC 60945 approved
Certified by leading notified body for maritime use

Discover more in the BROCHURE tab below

NW6000-7001 (standard switch) NW6000-7501 (PoE+ switch)
IEEE standards IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/FX
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3ad Port trunk with LACP
IEEE 802.3x Flow Control
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1q VLAN Tagging
IEEE 802.1ab Link Layer Discovery Protocol
IEEE 802.1x Port Authentication
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3x Flow Control
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
NW6000-7501 User Manual v1.2 March 2022 Page 12/323
IEEE 802.1Q VLAN Tagging
IEEE 802.1p Class of Service
IEEE 802.1X Port Authentication
IEEE 802.1AB Link Layer Discovery Protocol
IEEE 802.3ad Port Trunk with LACP
IEEE 1588v2 Precision Time Protocol
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at High Power over Ethernet (PoE+)
ITU-T G.8032
Performance Switching fabric 5.6 Gbps
L2 Forwarding 4.17 Mpps
MAC Entries 16 K
Jumbo frame 10 K
Switching fabric 24 Gbps
L2 Forwarding 17.86 Mpps
Packet Buffer size 8 Mbits
MAC Entries 16 K
Jumbo frame 10 K
Throughput 1,488,000 pps when 1000 Mbps spee
Ports 8 x 10/100Base-TX (RJ-45)
2 x 100/1000 SFP
1 x RJ-45 Console
8 x 10/100/1000Base-T (PSE)
4 x Gigabit SFP ports
1 x Console port (RJ-45 to RS232)
1 x USB port
Mechanical
and
environmental
Dimension (WxHxD) 50×161.5×122.2 mm
(1.97×6.36×4.81 inch)
Weight 780 g
Mounting DIN-Rail
Housing IP30 protection
Operating temperature -40°C to 75°C
Storage temperature -40°C to 85°C
Operating humidity 10% to 95% RH
Storage humidity 5% to 95% R
Dimension (WxHxD) 50×161.5×122.2 mm
(1.97×6.36×4.81 inch)
Weight 955 g
Mounting DIN-Rail
Housing IP30 protection
Operating temperature -40°C to 75°C
Storage temperature -45°C to 85°C
Operating humidity 10% to 95% RH (Non-Condensing)
Storage humidity 5% to 95% RH (Non-Condensing)
Power Input Voltage: – Primary inputs 24~57 VDC at a maximum of 6A
– Redundant inputs 24~57 VDC at a maximum of 6 A
Connection: 1 x Removable 6-pin terminal block
Overload current protection Support
Reverse Polarity Protection Support
Relay output 1 x with current carrying capacity of 1 A @ 24 VDC
System-power consumption 18 W
PoE Power Available at PD 25.50 W
Max Power delivered by PSE 30 W
Voltage Range (at PSE) 24-57 V
Voltage Range (at PD) 50-57 V
Maximum Current 600 mA
Maximum Cable resistance 12.5 Ω (Category 5)
Output capacity for PoE 240 W (48 VDC), 120W (24 VDC)
PoE supported mode Mode ANote:
PoE budget at 24 V input is 120 W.
If all the 8 ports are connected, then power delivered by PSE is 15W.
If only 4 ports are connected, then power delivered by PSE is 30 W.

NW6000-7001

User Manual

NW6000-7001 QIG

Quick Installation Guide

NW6000-7501

User Manual

NW6000-7501 QIG

Quick Installation Guide

NW6000-7001 (standard switch)
The NW6000-7001 is a Certified Managed Industrial 10 port switch which is well suited for industrial network applications. The switch is designed to meet the requirements for data transmission over Ethernet cable appliances and devices. The switch’s rugged IP30 aluminum case and hardened components withstand in operating temperatures from -40°C to 75°C.  The NW6000-7001 features 8 x 10/100 Base-TX + 2 x 100FX/Gigabit SFP ports.  

The NW6000-7001 switch guarantees reliable operation in critical environments where vibration and shock are  commonplace.  Gigabit backbone and redundant ring increase the reliability of the communications and reduce cabling and wiring costs. Additionally covering operating temperature, power input voltage, surge, ESD, and vibration, as well as conformal coating and power insulation, making the switches suitable for a variety of applications.  The switch is tested against the harshest maritime conditions and meet IEC 60945 standards. They have proven to withstand the EMC, environmental and physical influences encountered in the maritime world.

NW6000-7501 (PoE switch)
The NW6000-7501 is a Managed Industrial PoE+ Switch is perfectly suited for industrial network applications which require managed devices offering hassle-free fiber deployment, it is an ideal solution to deploy in automation as well as surveillance systems.  The switch is designed to meet the requirements of both power and data transmission over single Ethernet cable to PoE appliances and devices without the need for power outlets, eliminating additional cost of electrical cabling and circuits. The switch’s rugged IP30 aluminum case and hardened components withstand in operating temperatures from -40°C to 75°C.  The NW6000-7501 features 4 Gigabit SFP slots to insert fiber port which is immune to moisture, static electricity, power surges and short circuits, plus 8 10/100/1000Base-T PoE+ ports. Each of the PoE ports complies with the IEEE 802.3at standard allowing them to supply up to 30W to satisfy the growing demand of high-power consuming network devices such as WLAN AP, VoIP phones and IP surveillance cameras, and other powered devices in longer distances up to 100 meters with Cat 5e cables.  The NW6000-7501 switch guarantees reliable operation in critical environments where vibration and shock are commonplace.  Gigabit backbone and redundant ring increase the reliability of the communications and reduce cabling and wiring costs.  Additionally covering operating temperature, power input voltage, surge, ESD, and vibration, as well as conformal coating and power insulation, making the switches suitable for a variety of applications.  The switches are tested against the harshest maritime conditions and meet IEC 60945 standards. They have proven to withstand the EMC, environmental and physical influences encountered in the maritime world.